Kraft Monster : Mobile Holder

Mobile Holder


  • Old plastic lotion bottle
  • Bright Fabric
  • Modge Podge
  • Kitchen or exacto scissors
  • Sand Paper
  1. Mark a line with a pen around the bottle as shown below.
  2. Cut the bottle along the shape drawn with scissors. Behind make a round-cornered square opening for it to hang on the charger.
  3. Scrub the whole bottle with sand paper so that the Mod Podge sticks really well.
  4. Then, cut a piece of fabric that is big enough to wrap around the phone holder and an inch or two taller on the top and bottom.
  5. Turn the phone holder with the front facing yourself, and applied a generous layer of Mod Podge to the front.
  6. Next, place the fabric right on top, centering it where it needs to go.
  7. Apply more Mod Podge around the side of the container and continue to lay the fabric down right against it, pulling tightly as you wrap.  Also, be sure to pull the fabric down around the curve of the bottom of your bottle. This will help keep the fabric flat and smooth.  Use plenty of Mod Podge to aide you in this process.
  8. When you get to the back, overlap one of the edges over the other.  Make sure the fabric is smooth all the way around the bottle.
  9. Then trim around the entire container, cutting off the fabric nice and close to the edge.  Now, apply a nice thick layer of Mod Podge all over the fabric.  Be sure around all of the edges of fabric with the Mod Podge, ensuring that the fabric won’t peel off.
  10. Lastly, cut an oval shape (or whatever shape applies to you) to fit the bottom of the bottle.  Place a layer of Mod Podge on the bottom of the bottom, place the oval shape on the bottom, then apply another coat of the Mod Podge. 
  11. Use a box cutter/exacto knife to cut out the square-ish opening.
  12. Alllow to dry by hanging it on top of a vase.
You are done!!!!

Related Articles

Metallic Thank You Cards
Paper Pine Cones
No-sew Vintage Fabric Bunting
Printable House Warming Invites
Terry Burp Cloths